New Page 1
Heathway USA  
Search our Products:

*NEW ITEMS*
Abrasive Belts and Belt Sanders
Alicat Scientific Mass Flow Meters and Controllers
Bead Making Supplies and Torches
Burners / Bench
Burners / Bunsen / Little Torch / National Bench Burner /Burner Raise Lower
Burners / Cradle Type 1 Jet 7 Jet 14 Jet and 2SX
Burners / Fishtails
Burners / Hush Tips
Burners / Inconel
Burners / Knight Surface Mix Hand Torch
Burners / Knight-Heathway Hand Torches and Tips
Burners / National Hand Torches / Tips and Replacement Parts
Burners / NORTEL
Burners / Quartz
Burners / Ribbon Hush Tips
Burners / Twin Tubing
Cut-Off Machines and Accessories
Cutting Wheels Abrasive and Diamond
Diamond Belts
Diamond Drilling Machines
Diamond Drills, Hand Files, Hand Lapping Tools
Diamond Lapping Disk
Engineering Services
Gas Savers, Sparkers , Lighters
Glasses & Protective Eyewear
GlassWorking Chucks and Adaptors
Glassworking Lathes
GLOVES, Kevlar and Zetex
Graphite Products
Heathway Lathe Maintenance Kit
Iris with Stainless Steel Leaves
Lunzer Glass Scribes
N M Knight Burner Division
Ovens & Kilns
Polariscopes
Pressure Sensitive Tapes
Protective Coats, Aprons, Hoods & Jackets
Rollers & Steady Rests
Salem County Community College Tools and Supplies
Shop Supplies,Tools, Swivels, Stoppers, Tweezers, Scoring Knives, Blowhoses, Mouthpieces
SPOOLS / Polystyrene Drums
Tapes, Sleeving, Rope, & Wick
Used Equipment
Used Fiber Manufacutring Equipment
 

To view a subcategory of this category, select from the drop-down box.


Alicat Mass Flow Meters & Controllers

The Alicat MC series mass flow controller is designed to meet the above requirements:

Simplicity
The MC series mass flow controller is very easy to use. With the local display users can make changes to the configuration of the unit without the need for computers, complicated software or scripts.

Accuracy
Alicat MC series mass flow controllers can be configured with an accuracy spec of up to +/-0.4% of reading + +/-0.2% of full scale with a high-accuracy calibration. (standard calibrations are rated at +/-0.8% of reading + +/-0.2% of full scale)

Repeatablity
Alicat's patented technology allow its mass flow controllers to have very few moving parts. All of the internal components are fixed in place resulting in very little physical change inside the MFC. Little physical change in the flow cavity means higher rates of consistency and repeatablity. Alicat MC series mass flow controllers have a reapeatablity of +/-0.2% of FS

Reduced Cost of Ownership
Alicat MC series and VC series flow controllers require very little power to run thereby reducing operating costs. MC and VC series flow controllers also have less pressure drop when compared to similar flow devices. Reduced pressure drop means more process fluids go into your process and not into you measurement devices. The MC series mass flow controllers also measure pressure, temperature and volumetric flow in addition to mass flow which means less additional instruments you will have to buy and install.

Speed
The Alicat MC series mass flow controller has a response time of less than 10ms and a control time of 100ms making it one of the fastest naturally responding mass flow controllers on the market today. Click here to see a short video of how quickly an Alicat MC series mass flow controller responds to changes.

Versatility
MC series mass flow controllers are available in any flow range from 0.5SCCM through 1500SLPM. They are equipped with multiple analog outputs and inputs. Adding a totalizer allows users to see how much media has flowed through the system, making it a great way to monitor usage and indentify waste.

Call 856-327-4855 John Custer or Bob Halbreiner for Information on these items or when ordering.
 

View Cart

Check Out

My Account


Terms and Condition

Privacy Policy



Number of Items in Cart: 0
Current Total: $0.00


New Page 1

View Cart | Checkout | My Account | Terms and Conditions | Privacy Policy

*NEW ITEMS* | Abrasive Belts and Belt Sanders | Alicat Scientific Mass Flow Meters and Controllers | Bead Making Supplies and Torches | Burners / Bench  | Burners / Bunsen / Little Torch / National Bench Burner /Burner Raise Lower | Burners / Cradle Type 1 Jet 7 Jet 14 Jet and 2SX  | Burners / Fishtails | Burners / Hush Tips | Burners / Inconel | Burners / Knight Surface Mix Hand Torch | Burners / Knight-Heathway Hand Torches and Tips | Burners / National Hand Torches / Tips and Replacement Parts | Burners / NORTEL | Burners / Quartz | Burners / Ribbon Hush Tips | Burners / Twin Tubing | Cut-Off Machines and Accessories | Cutting Wheels Abrasive and Diamond | Diamond Belts | Diamond Drilling Machines | Diamond Drills, Hand Files, Hand Lapping Tools | Diamond Lapping Disk | Engineering Services | Gas Savers, Sparkers , Lighters | Glasses & Protective Eyewear | GlassWorking Chucks and Adaptors | Glassworking Lathes | GLOVES, Kevlar and Zetex  | Graphite Products | Heathway Lathe Maintenance Kit | Iris with Stainless Steel Leaves | Lunzer Glass Scribes | N M Knight Burner Division | Ovens & Kilns | Polariscopes | Pressure Sensitive Tapes  | Protective Coats, Aprons, Hoods & Jackets | Rollers & Steady Rests | Salem County Community College Tools and Supplies | Shop Supplies,Tools, Swivels, Stoppers, Tweezers, Scoring Knives, Blowhoses, Mouthpieces | SPOOLS / Polystyrene Drums | Tapes, Sleeving, Rope, & Wick | Used Equipment | Used Fiber Manufacutring Equipment |



Copyright © 2005 Heathway Products Division, N.M. Knight Company Inc
P.O. Box 1099 1001 South 2nd Street Millville, NJ 08332 Phone 856-327-4855 Fax 856-825-9142 E-mail: sales@heathway.com

This website programmed and powered by Media FusionTechnologies, Inc.